Led State; Commands, Functions & Configuration; Gps-Tool (Pc Software); Help & Support - GPSvision TK5000 Manual De Instrucciones

GPSvision

7. LED state

The LEDs (see 2) on the top of the tracker indicates its status. Depending on the blinking
interval you can see if the tracker has received GPS or if the battery is full, for example. If
the tracker is connected to the PC, no LED status can be determined.
LED Status
power save mode
GPS error
GPS
GPS positioning
(blue)
GPS signal OK
power save mode
battery charging
POWER
battery fully charged
(red)
battery almost empty
normal
power save mode
SIM-PIN error / locked
no SIM-card
GSM
GPRS connection
(green)
normal
GSM is searched
8. commands, functions & configuration
The TK5000 has many functions, for example Motion alarm, speed alarm, Geo-fence,
battery alarm, power-save modes, data logger, GSM-positioning, etc.
These functions can be configured by SMS, USB or GPRS. For the exact commands and
features, see the instructions on the CD-ROM.

9. GPS-Tool (PC software)

A PC software is included in delivery. With this software you can configure the GPS
Tracker and readout the data logger.
To use the GPS tool, you need Windows XP, Vista or Windows 7
For further details about the installation and usage of the GPS tools, look at the instruc-
tions on the CD-ROM. The software is translated in the following languages:
IT DE, EN, ES, FR,.
10. help & support
These instructions are only a short description. For detailed informations and assistance,
look at the manual at the CD-ROM. For further help, look at the forum on gpsvision.de
Manual
Blinkverhalten
OFF
150ms ON / 150ms OFF
50ms ON / 450ms OFF
50ms ON / 2000ms OFF
50ms ON / 6000ms OFF
1000ms ON / 1000ms OFF
LED permanently ON
50ms ON / 450ms OFF
50ms ON / 2000ms OFF
OFF
150ms ON / 150ms OFF
OFF
50ms ON / 200ms OFF /50 ms ON 1700ms OFF
50ms ON / 2000ms OFF
50ms ON / 450ms OFF
EN
11