DUCASSE INDUSTRIAL TWIN OP Instructivo De Montaje página 26

step 6
- Keep mounted doors in its closed position to fi x the stoppers. To do this, you need
to move them until they fi t with the carriers and fi x them in that position.
- Lock stoppers DN 80 in the desired position with the screwdriver, as shown in
Figure D .
PF
- Then, to fi x the remaining stoppers it is necessary to bring the door to its open
position, move the pulley stopper to fi t them with the carriers and fi x them in that
position with the Segmenta key .
PF
- To achieve optimal termination it is
necessary to consider the minimum measures
of overlapping (T) in each case, as shown in
the inset.
22
Stoppers Set-up
T
T
PF
T
* To make sure the
pieces are left in the right
position, it is
necessary to fi t the
stoppers on the carrier.
PF
T
Wood
Toledo
T = 50 min T = 49 min T = 63 min
Ágata