English - Kenwood 19683 Manual Del Usario

English

Use the roto food cutter to slice and to assemble your
shred such foods as carrot,
roto food cutter
cucumber, cabbage, apples, potato
and cheese.
assembly
before using your Kenwood
1 Select a drum. The drums are
attachment
numbered at the back and used as
Read these instructions carefully and
G follows:
retain for future reference. Drum No 1 - For fine shredding :-
G
G Remove all packaging. chocolate, nuts, carrot and cheese.
G Drum No 2 - For coarse
safety
shredding :- chocolate, nuts, carrot
and cheese.
G Never put your fingers in the feed
Drum No 3 - For thin slicing :-
G
tube. Only use the pusher supplied
onion, cabbage, cucumber, carrot,
with the roto food cutter attachment.
apples, potato and chocolate.
Do not use excessive force to push
G
G Drum No 4 - For thick slicing :-
the food down the feed tube - you
onion, cabbage, cucumber, carrot,
could damage your attachment.
apples, potato, chocolate and
Handle the drums with care, they are
G
beetroot.
extremely sharp.
Drum No 5 (Rasping drum) -
G
Do not touch moving parts.
G
For grating parmesan cheese and
G Unplug the appliance before fitting or
potato for German potato
removing parts or cleaning.
dumplings.
Refer to your main MG700 2 Fit the drum into the body of the
instruction book for additional use roto food cutter.
and safety warnings. 3 Lock the drum retainer in position by
turning anti-clockwise until the
G This appliance conforms to EC
locating line is directly underneath
directive 2004/108/EC on
the line on the body
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
to use your
27/10/2004 on materials intended
roto food cutter
for contact with food.
1 With the roto food cutter in the
before using for the first time
position shown
1 Wash the parts: see 'Cleaning'.
outlet. Rotate the roto food cutter so
that the feed tube is upright.
key
2 Place a collecting vessel beneath the
outlet.
pusher
3 Fill the feed tube to prevent food
feed tube and body
from slipping sideways during
drum retainer
processing. Switch onto speed 1
drums
and gently push down with the
pusher. Note: The pusher will only fit
one way.
2
.
, locate in the