Technical Specifications; Initial Operation - Parkside 280209 Traducción Del Manual De Instrucciones Original

G B I E

Technical specifications

High-pressure extension hose:
Length ............................................. 6 m
Suitable for high-pressure washer with the
following performance:
Rated pressure (p) ........ 110 bar / 11 MPa
Operating pressure (p max)
.................................160 bar / 16 MPa
Intake temperature (T max) 60 °C / 140 °F

Initial Operation

Connecting to PARKSIDE high-pres-
sure cleaners (with quick-connect
connection system):
1. Insert the high-pressure extension
hose (1) on the gun side of the
hose connection (2) into the con-
nection of the spray gun
(8) until it is heard to click into
place.
2. Connect the high-pressure exten-
sion hose (1) to the high-pressure
hose (9) of your PARKSIDE high-
pressure cleaner. You
can hear it click into place.
3. Check the connections by pulling
on the high-pressure extension
hose (1).
4. To release the connections, press
the release button (7) on the
quick-connect adapter (6) and
the release button (10) on
the spray gun (8) and pull off the
high-pressure extension hose (1).
1 0
Connecting to high-pressure clea-
ners of other manufacturers (wi-
thout quick-connect connection
system):
The adapters (3/4) included in the scope
of delivery can be useful when using a de-
vice made by another manufacturer.
1. Unscrew the quick-connect adap-
ter (6) from the hose connection
with the internal thread (5). You
can hold an open-ended span-
ner (WAF20) against the hose
connection with internal thread
(5).
2. Insert the quick-connect adapter
(6) in the hose connection on the
gun side (2) of the high-pressure
extension hose (1). You can hear
it click into place.
3. Screw the threaded adapter (4)
on to the quick-connect adapter
(6). You can use an open-ended
spanner (WAF20) on the threa-
ded adapter (4) to help you.
4. Insert the adapter for the device
output (3) into the hose connec-
tion with internal thread (5).
You can use a hexagon socket
wrench (WAF6) on the adapter
for the device output (3) and an
open-ended spanner (WAF20)
on the hose connection with in-
ternal thread (5) to help you.
5. Mount the high-pressure extensi-
on hose (1) between the device
output and high-pressure hose of
your high-pressure cleaner.
6. Check the connections by pulling
on the high-pressure extension
hose (1).