Power On/Off; Video Recording - WISEUPSHOP GL8000 Guia Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 13
[Note]:
If no Micro SD card is fitted into the camera, the indicator light will flash red and blue fast. The
camera will shut down automatically in 5 seconds.

3.1. POWER ON/OFF

3.1.1. Power on the camera by holding down Power Button for 2 seconds. The indi-
cator light will flash blue once and then glow solid blue, indicating the camera has
entered into standby mode.
3.1.2. Power off the camera by holding down Power Button for 2 seconds. The indi-
cator light will go out.
[Note]:
The camera will shut down automatically if it is in standby mode without any operation more
than 1 minute.

3.2. VIDEO RECORDING

3.2.1. Power on the camera by holding down Power Button for 2 seconds. The indi-
cator light will flash blue once and then glow solid blue, indicating the camera has
entered into standby mode.
3.2.2. Press Video Recording Button once to record video. The indicator light will
flash blue 4 times and then go out.
3.2.3. Press Video Button once again to stop recording video. The indicator light will
flash blue once and glow solid blue, indicating the camera is back to standby mode.
[Note]:
1). A video file will be generated and saved every 3 minutes automatically.
2). Low battery will shorten video file length.
3). The camera can record video continuously for 1 hour on a full charge.
4). Video Resolution: 1920×1080P
3.3. CAMERA /STILL PHOTOGRAPH
3.3.1. Power on the camera by holding down Power Button for 2 seconds. The indi-
cator light will flash blue once and then glow solid blue, indicating the camera has
entered into standby mode.
3.3.2. Press Camera Button once to enable the auto photograph function. The indi-
cator light will flash blue 3 times and go out.
3.3.3. A photo will be taken automatically every 2 or 3 seconds.
3.3.4. Press Camera Button once again to disable the auto photograph function. The
indicator light will glow solid blue, indicating the camera is back to standby mode.
IV. Video/Image File Uploads
4.1. When the camera is powered off, remove the Micro SD card and insert it into a
card reader.
4.2. Insert the card reader into a PC computer.
4.3. Removable disk driver appears.
Video Format: AVI

Publicidad

Tabla de contenido
loading

Productos relacionados para WISEUPSHOP GL8000

Tabla de contenido