1. OPERATING INSTRUCTIONS
1.2 Correct purpose
of use
1.3 Incorrect purpose
of use
The TV lift serves the following purpose:
• lifting a flat screen TV from a suitable furniture item,
• lowering a flat screen TV into a suitable furniture item.
The TV lift may be installed/used in the following surroundings:
• on rear panels and base plates of suitable and sufficiently load bearing
furniture items (refer to "2.3 Installation requirements / Technical data"),
• in dry interior rooms and at room temperatures of +10°C to +40°C..
Only use the TV lift as it was installed by the fitters. If the TV lift will be used in
another furniture item or for a larger/heavier flat screen TV in the future, contact
the manufacturer or qualified personnel.
The lifting and lowering process occurs optionally via the supplied manual switch
or the optional remote control.
Any use not mentioned in chapter 1.2 is considered to be improper.
The following also applies:
Do not install/use the TV lift in the following surroundings:
• in outdoor areas and in areas exposed to weather/humidity,
• in potentially explosive or aggressive environments,
• near hot surfaces, heat sources (heaters, stoves, microwaves, etc.) or in
areas with direct sunlight,
• free-standing in a room (without being attached to a furniture item),
• on fronts or tops of furniture items.
The following are also considered to be improper use:
• continuous use and overuse (use of more than 2 minutes at a time at full load
or more than 6 minutes per hour),
• overhead mounting,
• loading the TV lift with more than 65 kg,
• installing and using defective parts or non-original parts,
• using the control unit to power other units,
• conversion, maintenance or repair work on the TV lift
19