Bass Boost System; Aux In Operation; Using The Radio; Tuning Radio Stations - Naxa NPB-273 Manual De Operación

Bass Boost System

The BASS button controls the bass of the unit. Bass sound is the lower
frequency ranges of sound. The button can be pushed to OFF or ON mode,
When the BASS is on, the unit boosts (increases) the sound output of the bass
frequencies.

AUX IN Operation

This unit has provided an AUX-IN jack, through this jack other audio sources
can be connected.
1. Press the STANDBY/FUNCTION button on unit or FUNCTION key on
remote control to BT.
2. Connect the audio cable into the AUX-IN jack and the other end connect to
the AUDIO OUT jack of the external audio source. The unit will change to
AUX mode automatically.
3. Adjust the volume of the main unit. Press PLAY of the external audio
source (eg. MP3 player) to start playback.

USING THE RADIO

Tuning Radio Stations

1. Press the STANDBY/FUNCTION button on unit or FUNCTION key on
remote control to select FM or AM mode.
2. Tune to desired station by pressing the "NEXT/TUN.+" or "BACK/TUN.-
" button on unit or pressing the TUN./SKIP SEARCH
FORWARD/BACKWARD key on remote control, "STEREO" will show on
the display if receive stereo stations.
3. Press the VOLUME UP/DOWN button on unit or remote control to desired
volume level.
4. Extend FM TELESCOPIC ANTENNA to its full length if you are listening to
FM broadcasting. Gently move the unit back and forth to get the best
reception when you are listening to AM program, or place the unit in an
open location.
Note: The radio function is initially set at ST mode, if the broadcasting program
is too noisy when you are listening to FM stereo station, press MO/ST. button on
remote to switch to MONO FM. When you are receiving FM stereo program,
the display will show "STEREO"
5. To turn off the radio, press the STANDBY/FUNCTION button on unit or
FUNTION key on remote control to choose the other functions or press
STANDBY button to turn off the unit.

Radio Station Memory Operation

You may pre-store 30 (AM and FM) radio stations in memory for your preference,
so as you can listen to your desired station directly and quickly, no need to tune
and search every time.
1. Press the STANDBY/FUNCTION button on unit or the FUNCTION key on
remote control to select band (AM or FM), Tune into a station.
12