Stopping The Alarm - QFX SNOOZE CR-30 Manual De Instrucciones

3. Press the NEXT / MINUTE button (7) repeatedly until the correct MINUTE is shown on
the LED display.
4. After setting the HOURS & MINUTES press the VOLUME DOWN / ALARM-1 button
(3) to confirm the ALARM-1 time.
5. The clock will automatically set the Alarm-1 for BUZZER and the ALARM-1 BUZZER
Indicator Light (B) will turn ON.
6. To choose to wake to RADIO simply press the VOLUME DOWN / ALARM-1 button
(3) until the ALARM-1 RADIO Indicator Light (C) turns ON.
7. To turn the ALARM OFF press the VOLUME DOWN / ALARM-1 button (3) until both
the ALARM-1 Indicator Lights (B & C) turn OFF.
SETTING THE SECOND ALARM
NOTE: This Alarm Clock can be set for two separate Alarm times.
NOTE: Before setting the TIME make sure all of the non-clock functions (FM,AM) are
turned OFF. If any of the non-clock functions are playing, turn the function OFF by
simply pressing & holding the FUNCTION button (1).
1. Press & hold the VOLUME UP / ALARM-2 button (5) until the time flashes on the
LED display and the ALARM-2 BUZZER Indicator Light (E) flashes. Once the time is flashing
you can release the VOLUME UP / ALARM-2 button (5).
2. Press the PREV / HOUR button (6) repeatedly until the correct HOUR is shown on the
LED display.
• NOTE: The "PM" Indicator Light (A) will turn ON when the hour is set to PM.
For AM hours the "PM" Indicator Light (A) will turn OFF.
3. Press the NEXT / MINUTE button (7) repeatedly until the correct MINUTE is
shown on the LED display.
4. After setting the HOURS & MINUTES press the VOLUME UP / ALARM-2 button
(5) to confirm the ALARM-2 time.
5. The clock will automatically set the Alarm-2 for BUZZER and the ALARM-2
BUZZER Indicator Light (E) will turn ON.
6. To choose to wake to RADIO simply press the VOLUME UP / ALARM-2 button
(5) until the ALARM-2 RADIO Indicator Light (F) turns ON.
7. To turn the ALARM OFF press the VOLUME UP / ALARM-2 button (5) until both
the ALARM-1 Indicator Lights (E & F) turn OFF.
SNOOZE
Once the alarm sounds you can press the SNOOZE button (8) and the alarm will temporarily
be silenced. After Nine Minutes have passed the Alarm will sound again.

STOPPING THE ALARM

To permanently stop the alarm from sounding simply press the FUNCTION button (1) and the
alarm will automatically stop.
• NOTE: The Alarm-1 and/or Alarm-2 setting will still be ON and set for the same
time for the next day.