Alesis SR-16 Manual De Inicio Rápido Para El Usuario página 11

Use the SR-16 as an Expander Module
You can use the SR-16 as a tone module, where different drums will sound in
response to different MIDI notes received at the SR-16's MIDI in. You must run a
MIDI cable from the sequencer or electronic drum set's MIDI out to the SR-16's
MIDI in.
1
Press MIDI SETUP.
Use the UP/DOWN buttons
to select Omni mode or a
specific MIDI channel for
Poly mode.
2
Press the TEMPO/PAGE
UP button
to choose Page 2. Press the
UP arrow button
so that Drum In is on (i.e.,
the SR-16 receives MIDI
note data).
3
Press the TEMPO/PAGE UP BUTTON three times to choose Page 5. Press
the Down Arrow button so that the Clock In is Off (i.e., the SR-16 ignores
MIDI synchronization data).
4
Press the TEMPO/PAGE UP BUTTON three times to choose Page 8. Press
the Down Arrow button so that the Prg Chng is Off (i.e., the SR-16 ignores
MIDI program change data).
5
Press the TEMPO/PAGE UP BUTTON to choose Page 9. Press the Up
Arrow button so that the Note Map shows D00-09, D10-19, etc.
6
The SR-16 is now set up as an expander module. Press MIDI SETUP again
to exit MIDI setup mode and return to normal operation.
DRUM IN
ON
SETUPMIDI
PAGE
11
V O L U M E