QFX J-220BT Guia De Inicio Rapido página 7

BASIC OPERATION
Directly Recording from the Radio
1. Set the function selector to the radio position.
2. Turn ON the radio station you want to record.
3. Insert a blank cassette into the tape compartment.
4. Press the Record and Play button to begin recording.
5. Press the Stop button to end the recording or press the pause button to pause the
recording.
Care and Maintenance
To ensure optimum performance from your unit, keep the tape inside clean. To clean the
tape path, open the cassette door. Moisten a cotton swab with isopropyl alcohol or special
tape head cleaning fluid. Remove any excess alcohol from the swab. Clean the tape head,
capstan and pinch roller. Avoid scratching the head surface. To clean the unit housing, use
a soft damp cloth. After cleaning, wipe the unit surface with a dry cloth.
CAUTION: Never use chemicals such as benzene or paint thinner for cleaning.
Pinch Roller
Head
Capstan Cotton Swab
Keep magnets and metallic objects away from the tape head. If the head becomes
magnetized, noise will increase and the volume tone will deteriorate and possibly cause
damage.
TROUBLESHOOTING
If the Cassette tape fails to move, you get poor reception, or fluctuating volume, try
replacing the batteries or connect the unit to a power source.
Radio to Tape Recording:
1. Set the function selector to the radio position.
2. Turn ON the radio station you want to record.
3. Insert a blank cassette into the tape compartment.
4. Press the Record and Play button to begin recording.
5. Press the Stop button to end the recording or press the pause button to pause the
Tape to .mp3 Recording:
Set the function switch to TAPE and insert your music cassette tape. Insert a USB or SD
Card and wait for the REC/MP3 light to turn on and the press the REC button. Press play
on the cassette tape to begin the .mp3 conversion. The J-220BT converts at a resolution
of 128Kbps.
Build-in Mic Recording:
Set the function switch to USB and insert your blank USB or SD Card. Wait for the
REC/MP3 light to turn on and then press the REC button. Begin talking to record to from
the Build-in mic. The J-220BT converts at a resolution of 128Kbps. Press and hold the
REC/DEL button to erase the current loaded track.
Bluetooth to Tape Recording:
Set the function switch to MP3/BT position and insert your blank cassette tape. After
hearing the Bluetooth prompting sound, open the Bluetooth settings on your mobile device
to search the FP-BT. Select the option to connect. You will then hear a sound and see a
light flash. Select music from your favorite music app and then press the Record and Play
buttons on the tape deck to begin the transfer.