Service; Additional Safety Instructions For Paint Rollers; Working Procedures - Parkside PFE 50 A1 Traducción Del Manual De Instrucciones Original

5. Service

a) Have your power tool serviced by a qualified
repair person using only identical replace-
ment parts. This will ensure that the safety of
the power tool is maintained.
b) To avoid potential risks, if the appliance
power cable is damaged, it must be replaced
by the manufacturer, its customer service or
by a qualified technician.
Additional safety instructions for
paint rollers
■ Do not use the PAINT ROLLER for PAINTING
flammable substances.
The PAINT ROLLER must not be cleaned with
flammable solvents.
■ Do not PAINT with any substances whose
hazard levels are not known to you.
WARNING!
► Please follow the warnings, information and
data sheets provided by the paint manufac-
turer.
Wear a mask!
The inhalation of paint mist and solvent
vapours is harmful to health.
■ Work only in sufficiently ventilated rooms.
Wear safety goggles!
This will protect your eyes from splashing
or leaking paint.
PFE 50 A1

Working procedures

■ Note the mains voltage! The power source
voltage must conform to the details given on the
power tool nameplate. Power tools marked with
230 V can also be operated on a 220 V circuit.
■ Always place the base unit and paint bucket on
a level surface. When working on a ladder or a
sloping surface, there is a risk that the base unit
and the paint bucket could tip over. This could
cause injuries and paint spills.
■ Keep other electrical appliances at a safe dis-
tance while using the paint roller or cover them
up adequately. Possible paint splashes could
lead to accidents and soiling.
■ Wear appropriate work clothing. Paint is dif-
ficult to remove from clothing.
■ Avoid any constrictions to the pipe system, e.g.
due to squeezing, bending or tugging! Do not
stand on the delivery hose.
■ Keep the hose system well away from heat
sources.
■ To avoid damage, do not carry or drag the ap-
pliance by its hoses.
■ If you intend to paint an entire room, paint the
ceiling first and then the walls.
■ Start near light sources (e.g. windows) and then
work away from them.
■ Always paint an entire wall before taking a
long break from work.
■ If the extension adapter
can hold the handle
working with both hands.
■ Always switch the pump off at the on /off
switch first before switching off the appliance
at the main switch
is mounted, you
for more comfortable
.
GB │ IE │
15 ■