Sabrent NT-WRPT Manual Del Usuario página 5

4. The following message will be displayed on your web browser:
the "SSID" of your wireless network.
SSID
Auto (recommend)
Channel
Setup the wireless security and encryption to prevent from
unauthorized access and monitoring.
Security type
Supports 64/128-bit WEP, WPA, WPA2, WPA/WPA2 encryption
methods.
Security key the "Password" of your wireless network.
Click on 'Apply' button, The Repeater will restart.
Wait a few seconds your Wi-Fi Repeater is ready for use.
Wireless-N Wifi Repeater
How to connect your computer/laptop with the Wi-Fi Repeater
Adding a Wireless computers to the WiFi-Repeater
1. Log on to the computer.
2. Open Connect to a Network by right-
clicking the network icon (
notification area.
3. Choose the wireless network from the list
that appears, and then click Connect.
4. The repeater will then replace the SSID
for your network and should now be
accessible. Reconnect to your network. Do
note that the menu will no longer accessible
once connected.
5. To confirm that you added the computer, do the following:
Open Network by clicking the Start button
the search box, type network, and then, under Network and Sharing Center, click
View network computers and devices. You should see icons
you added and for the other computers and devices that are part of the network.
Note : If you don't see icons
file sharing might be turned off.
English-07 English-08
or ) in the
, and then clicking Control Panel. In
for the computer
in the Network folder, then network discovery and
Wireless-N Wifi Repeater