Amazon Basics B07PGK776D Manual Del Usuario página 32

Low battery shows on the
screen.
The batteries do not
charge in the handset or
the handset batteries do
not accept charge.
Problem
No dialling tone
when pressing
the <TALK ON>
key
When connected
to a PBX, no
and/or wrong
connection after
dialling
OUT OF RANGE
is displayed
The call does not
work.
No display.
32
• Place the handset in the telephone base for recharging.
• Remove and re-install the batteries and use it until fully
depleted, then recharge the handset in the telephone base.
• If the above measures do not solve the problem, replace the
batteries.
• Make sure the handset is placed in the telephone base or
charger correctly.
• Remove and reinstall the batteries, then charge for up to
15 hours.
• Purchase new batteries.
Causes
• The connection cord of the
base station is not plugged in.
• The adaptor cord is not
plugged in correctly in the
base station.
• Another handset is using the
base to make a call.
• Wrong telephone line cord
• Dialling prefix is needed.
• Base station out of range.
• Base station not connected
to mains.
• Service not activated or wrong
operator or wrong setting.
• Empty battery
Solutions
• Check the connections. Unplug and
plug back in the mains. Check that
the telephone cord has been plugged
into the base station and the phone
socket.
• Check the base station plug and the
230V plug (remove and plug in).
• Wait until the line is unoccupied.
• Use the original telephone line cord
supplied.
• Insert the dialling prefix.
• Reduce the range.
• Connect the base station to mains.
• Check your subscription with network.
• Recharge battery.