Toyota Rav-4 2001-2005
1. Unclip and remove side panel from
both sides of radio and climate controls.
(Figure A)
2. Remove (4) Phillips screws securing the
radio/climate control trim panel. (Figure B)
3. Remove (4) 10mm bolts securing the
radio. (Figure C)
4. Unplug and remove radio.
5. Remove factory brackets from radio. Retain
brackets for use during kit assembly .
Continue to Kit Preparation
(Figure A)
DASH DISASSEMBLY
(Figure B)
(Figure C)
Toyota MR2 Spyder 2000-2005
1. Unsnap the lower trim piece from
each side of the dash console
and remove (2) Phillips screws
exposed in each cavity. Remove
the upper trim piece from each
side of the console. (Figure A)
2. Remove the climate control knobs
and (2) Phillips screws exposed.
Remove the climate control trim
bezel. (Figure A)
3. Remove the ashtray and (1) 10mm
bolt exposed. Unclip the ashtray
trim bezel and remove. (Figure A)
4. Unclip the radio trim bezel,
remove (4) Phillips screws
securing the radio and disconnect
the wiring.
5. Remove factory brackets from
radio. Retain brackets for use
during kit assembly.
Continue to Kit Preparation
(Figure A)
REV. 12/5/2019 INST95-8202
3