Publicidad
Idiomas disponibles
Idiomas disponibles
DMX Mode
• Short press M key, when display 001~999, enter DMX mode.
• Press ◀ or key to change DMX decode address(001~999),
• long press for fast adjustment.
• If there is a DMX signal input, will enter DMX mode automatically.
Stand-alone dimmer mode
• Short press M key, when display L-1~L-8, enter stand-alone dimmer mode.
• ● Press ◀ or key to change dimmer mode number(L-1~L-8).
• ● Each dimmer mode can adjust each channel brightness independently.
• Long press M key for 2s, prepare for setup two channel brightness.
• Short press M key to switch two channel(100-1FF, 200-2FF).
• Press ◀ or key to setup brightness value of each channel.
• Long press M key for 2s, or timeout 10s, quit setting.
• Enter stand-alone dimmer mode only when DMX signal is disconnected
or lost.
Stand-alone dynamic mode
• Short press M key, when display P-1~P-4, enter stand-alone dynamic
mode.
• Press ◀ or key to change dynamic mode number(P-1~P-4).
• Each mode can adjust speed and brightness.
• Long press M key for 2s, prepare for setup mode speed, brightness. Short
press M key to switch two item.
• Press ◀ or key to setup value of each item.
• Mode speed: 1-10 level speed(S-1, S-9, S-F).
• Mode brightness: 1-10 level brightness(b-1, b-9, b-F).
•
Long press M key for 2s, or timeout 10s, quit setting.
• Enter stand-alone dynamic mode only when DMX signalis disconnected
or lost.
Stand-alone
dynamic mode
(P-1/P-4)
SEDE CENTRAL
C/ Río Jarama nº 149
45007, Toledo (España)
Tel.: 925 23 38 12
Fax: 925 23 38 80
DMX Mode
(001-999)
Stand-alone
dimmer mode
(L-1/L-2)
Speed
Brightness
(8 levels)
(10 levels, 100%)
GRUPO PRILUX ILUMINACIÓN S.L.U.
DELEGACIÓN NORESTE
C/ Bellvei 11-17
Polígono Can Salvatella.
08210, Barberá del Vallés
Barcelona (España)
Tel.: 93 719 23 29
Fax: 93 719 25 90
Dynamic mode list
No.
P-1
2ch light on/off synchronously
P-2
2ch single light on/off in sequence
P-3
2ch light fadein and fadeout synchronously
P-4
2ch light fadein and fadeout in sequence
Restore factory default parameter
•
Long press ◀ and key for 2s, restore factory default parameter,
display"RES".
• Factory default parameter: DMX decode mode, DMX first address is
1, two channel decode, rerverse-phase control, 10% minimum brightness,
dimmer mode number is 1, dynamic mode number is 1, disable automatic
blank screen.
Malfunctions analysis & troubleshooting
Malfunctions
No light
Wrong connection
Wrong
DMX decode ad-
brightness
Safety information
• The product shall be installed and serviced by a qualified person.
• This product is non-waterproof. Please avoid the sun and rain.
• Good heat dissipation will prolong the working life of the controller, please
ensure good ventilation.
• Ensure all wire connections and polarities are correct and secure before
applying power to avoid any damages to the LED lights.
•
If a fault occurs please return the product to your supplier. Do not at-
tempt to fix this product by yoursel
DELEGACIÓN LATAM
Carretera BV - 2249 Km 8
CNPJ: 16.863.522/0001-57
08791, Sant Llorenç
Rua das Castanheiras,
d'Hortons,
Nº 200 galpão 82,
Barcelona (Spain)
Jardim São Pedro
tel.: 93 891 37 24
CEP 13187-065
Hortolândia (SP)
Name
Causes
Troubleshooting
Check the
No power.
power.
Check the con-
or insecure.
nection.
Set corrrect de-
dress error.
code address.
Calle 79A N.º 7A-24
Bogotá (Colombia)
Tel: (+571) 702 49 99
Móvil: (+57) 315 217 49 79
www.grupoprilux.com
Publicidad
