Cable Management - Uline H-5759 Manual Del Usuario

CABLE MANAGEMENT

1. Press both sides of cable cover and pull off to
remove. (See Figure 31)
Insert the bottom
part, then lock
the bayonet.
Figure 31
FAN ASSEMBLY
NOTE: Fan comes with 6" and 10" long bracket.
Choose desired bracket based on application.
1. Slot 6" or 10" fan mounting bracket between opening
in fan upright mounting bracket. Align holes of each
bracket and attach using two M6 x 12 mm hex bolts
and two M6 flange nuts. (See Figure 32)
Figure 32
Upright Mounting
Fan Mounting Bracket
π
CHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA
PAGE 9 OF 27
OPTIONAL ACCESSORIES CONTINUED
Take off cord and
put cable in, insert
screw to lock cord.
Bracket
2. Align hole on the opposite end of fan mounting
bracket to the hole on the crescent fan bracket.
Attach using M12 x 20 mm hex bolt, M12 washer,
M12 lock washer and M12 hex nut. (See Figure 33)
Figure 33
3. Align fan assembly with uprights at desired height.
4. Secure to uprights with two M6 x 40 mm hex bolts
and two M6 flange nuts. (See Figure 34)
Figure 34
1-800-295-5510
uline.com
0121 IH-5759