Peavey Unity 2002-12 RQ Manual Del Usuario página 5

13
14
16. STEREO RETURN TO MONITOR A:
Sets the level of the Stereo Return signal (effects) that is added to the Monitor A mix. This is a mono
mix of the left and right signals.
17. STEREO RETURN TO MONITOR B:
Sets the level of the Stereo Return signal (effects) that is added to the Monitor B mix. This is a mono
mix of the left and right signals.
16
17
18
19
20
13. PHANTOM POWER:
Applies 48 VDC voltage to the input XLR connectors to power
microphones that require it. If phantom power is used, do not con-
nect unbalanced dynamic microphones or other devices to the XLR
inputs that cannot handle this voltage. (Some wireless receivers may
be damaged; consult their manuals.) The channel line input jacks
(#36) are not connected to the 48 V supply, and are safe for all inputs
(balanced or unbalanced).
14. POWER:
The mixer's main power switch. The power-on LED indicator will
light when the unit is powered.
15
18. STEREO RETURN TO L/R:
Sets the level of the Return signal (effects) that is added to the L/R mix.
19. STEREO RETURN PAN:
Determines the balance of the Stereo Return signal that is added to the L/R
mix. If the signal is mono, it sets the left-right position.
20. MONITOR FADER:
Sets the overall level of the monitor signal that is sent to the monitor output
jack. The optimum setting for this control is the "0" (unity gain) position.
21. TAPE TO MONITOR A LEVEL:
Adjusts the level of the tape signal supplied to the Monitor A mix. This
control is independent of the tape L/R level.
22. TAPE TO MONITOR B LEVEL:
Adjusts the level of the tape signal supplied to the Monitor B mix. This
control is independent of the tape L/R level.
23. TAPE TO L/R LEVEL:
Adjusts the level of the tape signal supplied to the L/R mix.
24. MASTER LEFT/RIGHT FADERS:
Master L/R level controls. Since the tape and headphone/control room
outputs come from this mix, they will also be affected by its adjustment.
The output levels are monitored by the left and right meters. The optimum
setting for this these controls is the "0" (unity gain) position.
15. EFFECTS MASTER:
Sets the output level of the effects mix sent to the
output jack.
5