JKC905Pub1000003012
5/18/06
3:45 PM
Product may vary slightly from what is illustrated.
1. 1.7L (60 Oz) kettle
2. Built in scale filter
3. Lid
4. On/Off switch
5. Handle
6. Lid release button
7. Indicator light
8. Dual-sided water level markings
9. Cord storage
†10. 360º swivel base (Part# JKC905-01)
† Consumer replaceable/removables parts
3
Page 4
12 cups
60oz.
10 cups
50oz.
8 cups
40oz.
6 cups
30oz.
4 cups
20oz.
How to Use
This appliance is for household use only and is for boiling water only.
Before first use, wash the interior of the kettle and the built-in scale filter with
soapy water and rinse.
BOILING WATER
1. To boil water, press the lid release button inside the handle
to open the lid (A). The lid locks in open position.
k
A
2. Fill the kettle with water to desired level. This kettle has
dual markings so you can measure with either ounces/cups
12 cups
60oz.
or liters. Be sure not to exceed the MAX line on the water-
10 cups
50oz.
level markings (B).
8 cups
40oz.
6 cups
30oz.
3. Firmly press down on the lid until it is securely in
4 cups
20oz.
the kettle.
k
B
Important: Never open the lid while water is boiling.
4. Place the 360° swivel base on a flat surface then place the
10 cups
50oz.
8 cups
40oz.
kettle onto the base (C). Plug into a wall outlet.
6 cups
30oz.
4 cups
20oz.
k
C
5. To turn on the kettle, press the I/O (On/Off) switch, located
at the top of the handle, to the I (On) position (D).
The indicator light illuminates (E).
6. A concealed heating element designed to boil water and
reduce lime scale is located at the bottom of the kettle.
k
D
When the water has boiled, the kettle shuts off
automatically and the indicator light turns off.
Warning: After boiling water, the outside of the kettle is hot.
Use only the handle to pick it up. Do not grasp kettle body
with both hands.
Note: The swiveling base remains at regular room
k
temperature. Both the kettle and the swiveling base are safe
E
to place on dry surfaces.
This unit has a boil/dry protection safety feature that automatically turns off the
kettle and indicator light when finished boiling or when there is no water inside.
7. If you desire another kettle of hot water, simply repeat steps 1-6.
8. Unplug the kettle when not in use.
4