Troubleshooting Guide - Royal Appliance mry4001 Manual Del Propietário

TROUBLESHOOTING GUIDE

WARNING: TO REDUCE RISK OF PERSONAL INJURY - UNPLUG CLEANER BEFORE SERVICING
PROBLEM POSSIBLE REASON
Cleaner won't run 1. Power cord not firmly plugged into
outlet.
2. Blown fuse or tripped breaker.
3. Needs service.
4. Thermal Protector activated.
Cleaner won't
1. Dust bag not installed correctly.
pick-up or low
2. Dust bag full.
suction
Dust escaping
1. Dust bag full.
from cleaner
2. Dust bag not installed correctly.
3. Hose not installed correctly.
Cleaner tools won't
1. Hose clogged.
pick-up
2. Hose inlet clogged.
3. Dust bag full.
4. Filter clogged.
ANY OTHER SERVICING SHOULD BE DONE BY AN AUTHORIZED SERVICE REPRESENTATIVE
CUSTOMER SERVICE (1-800-321-1134)
In the event that further assistance is required, see your Yellow Pages for an authorized Royal
any transportation to and from any place of repair are to be paid by the owner. The service parts used in this unit
are easily replaced and readily available from an authorized Royal
by the model number and manufacturing code when requesting information or ordering replacement parts. (The
model number appears on the bottom of the cleaner.)
POSSIBLE SOLUTION
1. Plug unit in firmly.
2. Check fuse or breaker in home. Replace
fuse/reset breaker.
3. Take to service center or call 1-800-321-1134.
4. Allow cleaner to cool - Pg. 3.
1. Empty and replace dust bag - Pg. 8.
2. Remove and replace dust bag - Pg. 8.
1. Empty and replace dust bag - Pg. 8.
2. Remove and replace dust bag - Pg. 8.
3. Reconnect hose - Pg. 10.
1. Remove hose and tools; remove obstruction -
Pg. 8.
2. Remove hose and clean inlet - Pg. 8.
3. Remove and replace dust bag - Pg. 8.
4. Clean filter - Pg. 8.
® Dealer. Costs of
Dealer or retailer. Always identify your cleaner
®
13