Assembly Instructions for Model Numbers 524DR, 530DR, 536DR, 542DR, 548DR
IMPORTANT INFORMATION
Remove collar, tags, and leads from pet before placing it in the home to prevent possible entanglement.
Unwrap and remove all parts from the box. Keep the box and packing material until the product is assembled. In case of return or
exchange, failure to return product in similar condition as received could result in limited reimbursement. Please save sales
receipt as proof of purchase for warranty purposes. Check to ensure you have all the parts below. If you discover any parts are
missing, immediately call our toll-free service helpline at 1-800-428-8560 (Monday - Friday 9 a.m. to 4 p.m. EST) or email
customer service at info@midwesthomes4pets.com.
Parts Include: Exercise Pen (8 connected panels), 4 Ground Anchors, and 4 Snaps
ASSEMBLY INSTRUCTIONS
Remove contents from the carton. Locate the exercise
1.
pen, ground anchors, and snaps.
Configure the pen and connect the two ends with snaps.
For best results, place snaps at the top and bottom
between the two closely spaced wires. Space the
remaining two snaps evenly along the middle wires.
Note: The pen can be moved and
reconfigured after it has been assembled.
2.
For added safety, install a ground anchor at the
bottom right corner of the door panel. Then install the
remaining anchors, spacing them evenly around the
perimeter of the pen (Figure 1).
To Operate the Door:
Lift the locking handle, raise the door up until it clears
the top of the eyelets, then swing open (Figure 2).
To close, swing the door back toward the pen, lift the
door up with locking handle until it clears the top of the
eyelets, and push the door firmly against the pen
before lowering the door. The door is secure when
positioned behind the eyelets and the locking handle
is in the down position (Figure 3).
Exercise Pen
with Door
800-428-8560
midwesthomes4pets.com
P.O. Box 1031
Muncie, Indiana 47308
Figure 1
Eyelets
Figure 2
Figure 3
1