Product Overview; System Requirements; Package Contents; Factory Default Settings - Nilox DPS-130U Manual Del Usuario

Thank you for purchasing this Print Server, that allows any networked computer to share a USB printer. This document
describes how to install your Nilox Print Server. Please keep this Quick Start Guide for future reference.
P O
RODUCT VERVIEW
 USB 2.0 Print Server
 Compliant with USB 2.0 Hi-speed printing (backward compatible with USB 1.1/1.0)
 Equipped with one 10/100 Fast Ethernet LAN port
 It also includes a simple software utility Network Printer Wizard (a user-friendly program that allows you to complete
the settings for the print server)
 Windows® 8/7/Vista/XP (32/64bit)
 Compatible with a wide range of USB (LPR/GDI) printers
S R
YSTEM EQUIREMENTS
Before installing the Adapter, your PC should meet the following:
 Intel
Pentium III 600MHz or compatible processor with 512MB RAM
® ®
 Windows
8/7/Vista/XP operating system
®
 Minimum 50MB free disk space required for driver and utilities installation
 CD-Rom drive
P C
ACKAGE ONTENTS
Open Nilox Print Server box and unpack it carefully. The box should contain the following items:
 Print Server
 AC Adapter (5V@1.2A)
 Cat 5 LAN Cable (1meter)
 Quick Start Guide (English, Italian and Spanish)
 CD-Rom with Utility, Driver and Manual (English and Italian)
If any item is found missing or damaged, please contact your local reseller for replacement.
F D S
ACTORY EFAULT
Before you configure this Print Server, you need to know the following default settings:
 Password:
 IP address: DHCP Client (169.254.10.10 if DHCP server is not available)
To reset password or to restore factory settings, press the reset button (10 seconds or more).This procedure is usually
used when you cannot login to the router, e.g. password forgotten
C
ABLING
 Firstly connect the product to the Printer through the USB cable (not included)
 Connect the Router/Switch to the RJ45 port
 Finally connect the AC/DC Adapter to the socket and after some seconds to the Print Server
After this, the LEDs status will be the following:
LED
POWER Green light Lit up when power is plugged in and the system is ready.
LAN ACT Green light lit up when connected to Ethernet device or Blinking light when data transmitting/received.
LAN LINK Yellow light lit up when connected.
ETTINGS
MEANING
16
ENG