Publicidad
Enlaces rápidos
Vertical Manager Rings
Vertical Manager Tie
Bracket
Étriers de gestion
verticaux
Anillos Organizadores
Verticales
Technical Support: 800-824-3005
Customer Service: 800-722-2082
International: 425-486-2222
Fax: 425-483-5270
Web: www.leviton.com
49260-MR*
49261-BKT
Instructions for Use
Description
Leviton's highly flexible, customizable front and rear
vertical management rings reduce tension stress and
maintain cable bend radius. Providing fixed anchor points
and retention rings, these products are designed to help
organize loose-fit and hook-and-loop cable installations.
Installation
Use on Single Rack Installation
1. Mount all patch and management panels to rack
prior to installing the vertical manager rings.
2. Locate desired mounting positions along rack.
Equally space manager rings along rack or position
for optimal cable management.
Interbay Installation
1. Place tie bracket over each ring and mount to
adjacent rack, using the screws provided (Figure 1).
Adjust the screws to align the bracket between racks.
2. Tighten all mounting screws, then route cables
accordingly.
IMPORTANT INSTRUCTIONS
1. Read and understand all instructions. Follow all
warnings and instructions marked on the product.
2. Do not use this product near water—e.g., near a tub,
wash basin, kitchen sink or laundry tub, in a wet
basement, or near a swimming pool.
3. Never push objects of any kind into this product
through openings, as they may touch dangerous
voltages.
SAVE THESE INSTRUCTIONS
4.
SAFETY INFORMATION
1
1. Never install communications wiring or components
during a lightning storm.
2. Never install communications components in wet
locations unless the components are designed
specifically for use in wet locations.
3. Never touch uninsulated wires or terminals unless the
wiring has been disconnected at the network interface.
4. Use caution when installing or modifying
communications wiring or components.
5. To prevent electrical shock, each opening must be
filled with a module.
PK-93173-10-02-0B
0R-93173-00-00-02
Vertical Manager Rings
Vertical Manager Tie
Bracket
Étriers de gestion
verticaux
Anillos Organizadores
Verticales
.
Technical Support: 800-824-3005
Customer Service: 800-722-2082
International: 425-486-2222
Fax: 425-483-5270
Web: www.leviton.com
49260-MR*
Instructions for Use
Description
Leviton's highly flexible, customizable front and rear
vertical management rings reduce tension stress and
maintain cable bend radius. Providing fixed anchor points
and retention rings, these products are designed to help
organize loose-fit and hook-and-loop cable installations.
Installation
Use on Single Rack Installation
1. Mount all patch and management panels to rack
prior to installing the vertical manager rings.
2. Locate desired mounting positions along rack.
Equally space manager rings along rack or position
for optimal cable management.
Interbay Installation
1. Place tie bracket over each ring and mount to
adjacent rack, using the screws provided (Figure 1).
Adjust the screws to align the bracket between racks.
2. Tighten all mounting screws, then route cables
accordingly.
IMPORTANT INSTRUCTIONS
1. Read and understand all instructions. Follow all
warnings and instructions marked on the product.
2. Do not use this product near water—e.g., near a tub,
wash basin, kitchen sink or laundry tub, in a wet
basement, or near a swimming pool.
3. Never push objects of any kind into this product
through openings, as they may touch dangerous
voltages.
SAVE THESE INSTRUCTIONS
4.
SAFETY INFORMATION
1. Never install communications wiring or components
1
during a lightning storm.
2. Never install communications components in wet
locations unless the components are designed
specifically for use in wet locations.
3. Never touch uninsulated wires or terminals unless the
wiring has been disconnected at the network interface.
4. Use caution when installing or modifying
communications wiring or components.
5. To prevent electrical shock, each opening must be
filled with a module.
PK-93173-10-02-0B
0R-93173-00-00-02
49261-BKT
.
Publicidad
Resumen de contenidos para Leviton 49260-MR Serie
- Página 1 Instructions for Use Vertical Manager Rings Description Vertical Manager Rings Description Leviton's highly flexible, customizable front and rear Leviton's highly flexible, customizable front and rear vertical management rings reduce tension stress and vertical management rings reduce tension stress and Vertical Manager Tie Vertical Manager Tie maintain cable bend radius.
- Página 2 Les étriers de gestion verticaux avant et arrière Los flexibles anillos organizadores de Leviton pueden souples et adaptables de Leviton réduisent la tension ser utilizados en la parte frontal o posterior de la ultra souples et adaptables de Leviton réduisent la ser utilizados en la parte frontal o posterior de la exercée sur les câbles tout en en maintenant le rayon...
- Página 3 FOLDING INSTRUCTIONS - 5.50" X 8.50" (HALF SHEET) DO NOT PRINT DIMENSIONS: WIDTH 5.50" X LENGTH 8.50" (HALF SHEET). CUT LINE MATERIAL: WHITE, 20 LB, OPAQUE, NON-COATED BOND. PRINT COLOR: BLACK, PERMANENT TYPE INK. FABRICATION INFO: a) 0.10 INCHES MINIMUM REQUIRED BETWEEN PRINTING AND EDGES OF PAPER ON ALL SIDES.