Nuova AU1080MA Manual De Instrucciones página 4

OPERATION
READY: The shredder is currently on STANDBY and ready to operate when paper is inserted. With the
feed slot now exposed, you can shred sheets of paper or 1 credit card per pass (FIGURE 6).
DISABLED: The safety feature has been activated. All power to the SHREDDER IS
CURRENTLY SHUT OFF AND WILL NOT OPERATE until the cover is returned to the
"READY" setting. The cover has been completely tilted beyond the safe position (FIGURE 6).
When shredding is completed, you can press the designated "PUSH CLOSE" area on the cover to tilt
shut the paper feed slot (FIGURE 5). It is recommended to have the paper feed slot closed when shredder
is not in use to prevent any objects from accidentally getting into the feed slot.
Never shred large paper clips, window or insulated envelopes, continuous forms,
newsprint, bound pages (in example: notepads, checkbooks, magazines, etc...),
transparencies, laminated documents, cardboard, any items with adhesives, hard
materials or plastic (except Credit Cards).
This shredder will shred staples and small paper clips. It is recommended that you remove paper clips
whenever possible to extend the lifespan of your shredder.
Only shred credit cards by feeding them vertically into the middle of the entry,
releasing when shredding begins. Never feed more than one credit card at a time.
DO NOT ACTIVATE REVERSE FUNCTION WHILE SHREDDING CREDIT CARDS.
Overfeeding the shredder: Shredding beyond the specified sheet capacity can result in extensive
damage to the shredder. Overfeeding will strain the machine and quickly wear and break the cutting
blades and internal components.
Overheating with extended use: In the event that the shredder has shred continuously beyond
the maximum running time and overheating, the unit will automatically shut off. If this happens, switch
the shredder Off for 30 minutes or longer before resuming normal operation.
LED Status indicators:
4
FIGURE 6