3) Call out a scene saved in SUB1-6
1. Press the function key (#7), select the "SUB MASTER" line and press Enter (#14) ; the LCD will display:
SUB MASTER 1--6
LITE-PUTER CORP.
2. Press the desired hotkey under #3 (example here: SUB1) ; while you press the key, the scene in SUB1 will be
sent out at 100% and the LCD will display:
LOAD SUBSCENE 1
3. Set the corresponding fader to control the output level of the SUB-scene. The LCD will display:
SUB MASTER 1--6
SUB1 =
4) Call out a scene saved in Scene1-40
1. Press the function key (#7), select the "SUB MASTER" line and press Enter (#14) ; the LCD will display:
SUB MASTER 1--6
LITE-PUTER CORP.
2. Press the SC key (#5) ; the LCD will display:
LOAD
SCENE
KEYIN SC 1...40
3. Select the desired scene with the numeric keypad (#11) (example: 5). The LCD will display the selected scene
number in the top row and the name of the scene in the bottom row:
LOAD
SCENE
DISCO
4. Press Enter (#14) to confirm. The LCD will return to the display as shown in step 1.
5) Edit a scene
1. Call out the desired scene and press the CH key (#6) ; the LCD will display:
CHANNEL MODIFY
CH
1 -----=
2. Press the numeric keys (#11) or the ▲and ▼keys (#15 & 16) to select the channel, press the AT key (#12) to put
the cursor on the channel value and modify the value with the numeric keypad ; the LCD will display (e.g.):
CHANNEL MODIFY
CH 15 -----= 60%
3. Press enter to save the new data ; the LCD will display:
SUB MASTER 1--6
LITE-PUTER CORP.
6) Clear the scene output
Press the CL and SC keys (#5 & 10) simultaneously or pull the master fader (#17) to 0 and press the master key
(#18) to clear all values.
LPTJUNIOR
15%
_
5
0%
4
VELLEMAN