Tabla de contenido
Publicidad
Installation
ished, etc., it is recommended that they be made of non-combustible material, if not, they should be made with
a suitable non-combustible heat-insulating material.
Once the Conveyor Toaster has been placed in position by consulting International Standards and regulations.
The Conveyor Toaster is ready to operate. Before first use, please warm up the unit for 10 minutes until all
smoke and/or odor has dissipated.
Operation
Turn on the power switch. Choose both elements or just bottom element to heat based on cooking required.
Turn the dial of the thermostat to 8, wait for about 20 minutes for the inside temperature to reach 220°, now
you can start to cook.
General cooking temperature is between 220° and 240°. Select the conveyor belt speed, this may vary for par-
ticular kind of foods if needed (It is advised to make the speed dial to 8 to cook bread). Put the food on the tray
and let it slid down on the conveyor belt to cook. When not cooking, the thermostat must be turned down and
the power switch to be put in the off position and the unit is to be unplugged.
Maintenance
When finished, please turn off the power switch, It is advised that the motor can not work continuously for over
4 hours.
The Conveyor Toaster should be cleaned using warm, soapy water after each day's operation.
Do not immerse the machine in water to clean.
The appliance is not to be cleaned with a water jet.
Troubleshooting
If the Conveyor Toaster does not work, please check the following:
1. The power supply is plugged in and switched on.
2. The positions of the switch and thermostat are correct.
3. Breaker has not tripped on electrical panel.
6
Publicidad
Tabla de contenido
Solución de problemas
