Omcan MS-IT-0250-M Manual Del Usuario página 5

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

difficulties unless supervised or trained by persons responsible for their safety.
Children and young people should be supervised so that they do not play with the slicer.
The blade is very sharp and should be handled with extreme care.
Do not damage the blade by cutting hard objects such as bones.
Safe use requires compliance with the following warnings:
Install the machine in accordance with the instructions given under the "Installation" section.
Install the machine in an area that cannot be accessed untrained people and children.
Use of the machine requires full attention. PAY ATTENTION AT ALL TIMES!
Do not wear loose-fitting clothes particularly with open sleeves; where necessary use suitable headgear to hold
back hair.
When slicing, do not allow anyone to touch the slicer, especially the blade.
Do not remove, cover or alter the rating plates fitted to the machine body and ensure their prompt
replacement in case of damage.
Do not remove safety devices and do not alter or remove safety guards.
Only approved product types should be sliced, do not attempt to slice products that are specifically
excluded.
Ensure that the product holder, receiving tray, surrounding areas and floor are kept clean and dry at all
times.
Do not use the slicer as a supporting surface or lay any object on it that will not allow normal slicing
operations.
Stop the machine immediately and request the assistance of authorised technical support staff in the event
of malfunction, suspected breakage, improper movements, strange noises, etc.
Always use cut and tear-resistant gloves when performing cleaning and maintenance.
The product to be sliced should only be placed on and removed from the feed carriage when the latter is fully
retracted (furthest away from the blade) and the carriage nearest the operator.
DO NOT use slicing accessories that have not been supplied by Omcan.
Please contact the Omcan or an authorised service centre for all extraordinary maintenance operations (chain,
blade replacement, etc.).
USING THE SLICER CORRECTLY
The slicer is only designed to slice food of the type and size specified herein.
Safety and Warranty
5

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido