Technical Specifications - Chicco DCS 932L Manual Del Usuario

CAMERA CONFIGURATION AND MYDLINK
REGISTRATION
Connect one side of the included Ethernet cable
to the network cable connector located on the
rear panel of the DCS-932L and attach the other
side to one LAN port of your router.
Attach the adapter jack in the power connector
located on the rear panel of the DCS-932L and
connect adapter plug to an easily accessible
power socket.
Power is confirmed when the LED Power Indicator
located below the lens on the DCS-932L is green
illuminated.
Insert the DCS-932L Setup Wizard CD in the CD-
ROM drive of your laptop.
WINDOW USERS
If the CD Autorun function does not automatically
start on your computer, go to Start > Run.
In the run box type D:\autorun.exe (where D:
represents the drive letter of your CD-ROM drive)
and click OK. When the autorun screen appears,
click Set up your Cloud Camera and follow the
on-screen instructions.
Click on the Start button and follow the on-screen
instructions which will guide you step-by-step
through the installation process from connecting
your hardware to configuring your camera and
registering it with your mydlink account.
MAC USER
On the desktop, open your CD drive and double-
click on the SetupWizard file.
Within 20-30 seconds, the Setup Wizard will
open, which will guide you step-by-step through
the installation process from connecting your
hardware to configuring your camera and
registering it with
your mydlink account.
Through the Setup Wizard instructions:
you can choose camera configuration mode and
the camera will automatically create a secure
connection to your router. While connecting, the
green LED will flash and your camera will reboot.
1) Ethernet Cable configuration:
hold Ethernet cable connected to your camera
and router.
2) WPS configuration:
detach the Ethernet cable from your camera and
router, then press and hold the WPS button of
your camera for three seconds.
The blue WPS status LED above the button will
blink.
Press the WPS button on your router within 60
seconds.
Note: The WPS button is usually on the front or
side of your router.
On some routers, you may need to log in to the
web interface and click on an on-screen button to
activate the WPS feature.
If you are not sure where the WPS button is on
your router, please refer to your router's User
Manual. If your router does not include WPS
button, please choose alternative configuration
modes.
You can register your camera with a mydlink
account.
At the end of Setup Wizard you will be able to
remotely access your camera from the www.
mydlink.com website or from the dedicated App
free available as mentioned on the packaging.
Note: mydlink portal requires JavaTM to function
correctly.

TECHNICAL SPECIFICATIONS

Networking Protocol
• IPV4, ARP, TCP, UDP, ICMP
• DHCP Client
• NTP Client (D-Link)
• DNS Client
• DDNS Client (Dyndns and D-Link)
• SMTP Client
• FTP Client
• HTTP Server
• PPPoE
• UPnP Port Forwarding
Built-In Protocol
• 10/100BASE-TX Fast Ethernet
• 802.11b/g/n WLAN
Wireless Connectivity
• 802.11b/g/n Wireless with WEP/WPA/WPA2
security
• WPS
Wireless Transmit Output Power
• 16 dbm for 11b, 12 dbm for 11g,
12 dbm for 11n (typical)
11