bluefin Hoverboard Manual De Instrucciones página 7

RECALIBRATION
Occasionally your Blue n board may need a manual re set. To do this, follow the
instructions below.
1
Ensure the board is fully charged before recalibration.
Turn the board o and ensure the board is level, the grooves on the side of the
2
board should line up.
3
Hold down the power button for 30 seconds. A blue light should begin ashing
under your board, let this continue for 30 seconds.
4
Turn o the board and then complete the reset by switching the board back on.
5
Your board should now be recalibrated and ready to go!