Sanus OLF15 Manual De Instrucciones página 14

STEP 2B Attach Wall Plate — Solid Concrete / Concrete Block
CAUTION:
Avoid potential personal injuries and property damage!
●
Mount the wall plate assembly
●
Minimum solid concrete thickness: 8 in. (203 mm)
●
Minimum concrete block size: 8 x 8 x 16 in. ( 203 x 203 x 406 mm)
1. Position the wall plate template
2. Remove the wall plate template
IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm). Never drill into the mortar between blocks.
1
NOTE: TV shifts 3.05 in. (77.6 mm)
to the right or left when in the
home position. Consider this
when selecting the location of
your wall mount.
14
directly onto the concrete surface
20
on the wall at your desired height. Level the wall plate template and mark the hole locations.
19
and drill three pilot holes using a 3/8 in. (10 mm) diameter masonry drill bit.
19
19
2
3 in. (75 mm)
3/8 in.
(10 mm)