The safety aspect was included as well: The
saw blade is enclosed by a protective casing
that opens automatically when the device
dips into the work piece. This considerably
reduces the risk of injuries. Exchanging saw
blades is absolutely no problem thanks to the
integrated shaft lock and the easily accessible
saw blade fixation screw.
3 Scope of delivery:
1 piece Microcutter MIC
1 piece Operating instructions and safety
guidelines
1 piece Screwdriver
4 Technical data:
Motor:
Voltage:
Capacity:
Device:
Length:
Housing diameter:
Weight (including
connecting cable):
Saw blade rotational speed: 20,000/min
Max. saw blade diameter: 23 mm
Noise generation:
Vibration:
230 V,
50/60 Hz, ~
40 watt
KB 5 min
approx. 240 mm
approx. 36 mm
approx. 390 g
< 70 dB(A)
2,5 m/ s
2
Use only in dry rooms
Protection class II device
Do not dispose of the electrical
device in the household waste!
Read all instructions and safety
rules!
For your safety, always wear hearing
protection while working!
5 Commissioning
Your Microcutter MIC is ready for use when
delivered and does not require special com-
missioning measures. However, each time
before you begin work, check the device for
signs of obvious damage and make sure that
the automatic saw blade cover works cor-
rectly and swings back automatically to the
home position whenever the device is not in
use.
Always ensure your own safety. Despite its
compact size, the Microcutter MIC is an elec-
tric tool that poses a certain risk. Always
make sure to disconnect the mains plug
when you check the device, clean it or replace
the saw blade!
6 Working with the device:
Attention:
For your own safety, wear protective goggles
and hearing protection when you work with
the device!
- 9 -