Remote Control Range Information; Begin Using Your Remote; Pairing The Remote Control (Only For Bluetooth Remote Control); Other - Hisense H550F Manual De Usuario

ENGLISH FRANÇAIS

Remote control range information

The remote control can work at a distance of up to 26 feet in front of the TV set.
It can work at a 30 degree horizontal or vertical angle.

Begin using your remote

1. Slide the back cover to open the battery compartment of the remote control.
2. Insert two AAA size batteries. Make sure to match the (+) and (-) ends of the batteries with the (+) and (-) ends
indicated in the battery compartment.
3. Replace the battery compartment cover.
NOTES
• Discard batteries in a designated disposal area. Do not throw them into a fire.
• Remove old batteries immediately to prevent them from leaking into the battery compartment.
• If you do not intend to use the remote control for a long time, remove the batteries.
• Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth. If chemicals
touch your skin then wash it immediately.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable (NiCd, NiMH, etc.) batteries.
• Do not continue using the remote if it gets warm or hot.
• Call our Support Center immediately on the support website.

Pairing the Remote Control (only for Bluetooth remote control)

1. Pair the remote to the TV after you power it on. Keep the remote control within 10 feet from the TV.
2. Press the Home button on the remote control, select
Accessories.
3. Press and hold the [ ] button at least 3 seconds, then the remote name will be showed on the menu.
4. Select the remote name, and press the [OK] button to start pairing.
5. If the remote paired successfully then a confirmation message will display on the screen. If it did not pair successfully
then an unsuccessful message will display. Repeat the previous steps.
NOTES
• If an unknown error occurred with the remote then it could have been caused by interference. Try to remove
what's causing the interference and pair it again.
• If an unknown error occurred in the remote control while the battery power is normal, you can take out the batteries
and press any key for 1~2 seconds, then the remote control can work normally.
• The remote cannot be paired to the TV while the TV is in standby mode.

Other

Program your universal cable or satellite remote control to operate your new television (only for
USA)
If you would like to program your other household remote controls to your new television,please refer to the User's
Manual supplied by your Cable or Satellite provider. The Cable or Satellite providers' User's Manuals should include
instructions on how to program their remote to your television.
A list of codes for the most common Cable and Satellite providers are listed below. Use the code that is associated with
your Cable or Satellite provider (if applicable).
DIRECTV
0178, 10178, 10019, 10748, 11314, 11660, 11710, 11780, 12049, 10171, 11204, 11326, 11517, 11564, 11641, 11963,
12002, 12183
Time Warner Cable
386, 0178, 10178, 400, 450, 461, 456, 0748, 1463, 0463, 10463
ESPAÑOL
13
icon to enter the Settings menu to select Remotes &