Sunstech FRD16 Instrucciones De Seguridad página 2

FRD16
Safety Precautions
Read the following recommended safety precautions carefully.
Power Source
Before plugging in for the first time, read the following section carefully.
This device should be operated only from a 220-240V AC, 50 Hz outlet.
Be sure that the power supply voltage of the area be used meets the required
voltage and you select the correct voltage setting for your device.
Power Cord
Do not place the set, a piece of furniture, etc. on the power cord or pinch the cord.
Handle the power cord by the plug. Do not unplug the appliance by pulling from
the power cord and never touch the power cord with wet hands as this could cause
a short circuit or electric shock.
Never make a knot in the cord or tie it with other cords. The power cord should be
placed in such a way that they are not likely to be stepped on. A damaged power
cord can cause fire or give you an electric shock. When it is damaged and needs to
be replaced, it should be done by qualified personnel.
Moisture and Water
Do not use this device in a humid and damp place (avoid the
bathroom, the sink in the kitchen, etc). Do not expose this
device to rain or water, as this may be dangerous and do not
place objects filled with liquids, such as flower vases, on top.
If any solid object or liquid falls into the cabinet, unplug the
connected device(s) immediately and have it checked by qualified personnel
before operating it any further.
Cleaning
Before cleaning, unplug this device from the wall outlet. Do
not use an aggressive liquid or aerosol cleaners. Use a soft and
dry cloth.
Ventilation
The slots and openings on the device are intended for ventilation and to ensure
reliable operation. To prevent overheating, these opening must not be blocked or
covered in anyway. When installing this unit make sure to leave space sufficient
around the unit to ensure the ventilation to improve heat radiation.
Do not expose the unit to extreme conditions of heat, cold or moisture
EN-1
Heat and Flames
The device should not be placed near to open flames or sources of intense heat
such as an electric heater. Ensure that no open flame sources,
such as candles, are placed on top of the device. Batteries
should not be exposed to excessive heat such as sunshine, fire
or the like.
Lightning
In case of storm and lightning or when going on holiday,
disconnect the power cord from the wall outlet.
Replacement Parts
When replacement parts are required, make sure that the service technician has
used replacement parts, which are specified by the manufacturer or have the same
specifications as the original one. Unauthorized substitutions may result in fire,
electrical shock or other hazards. Please contact the brand or manufacturer that will
redirect you to the nearest technical service which will supply or change the
replacement parts
Servicing
Please refer all servicing to qualified personnel of the brand. Do
not remove the cover yourself as this may result in an electric
shock.
Risk of electric shock
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of not insulate, "dangerous voltage"
within the product's enclosure that may be of sufficient magnitude to constitute a
risk of electric shock of persons.
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
Waste Disposal
Instructions for waste disposal:
- Packaging and packaging aids are recyclable and should principally be recycled.
Packaging materials, such as a plastic bag, must be kept away from children.
EN-2