Publicidad
Idiomas disponibles
Idiomas disponibles
Set-Up
Propane Tank Installation
1. After trap is placed in its ideal location,
place propane tank onto the molded cradle.
2. Making sure propane tank is fully closed, attach
propane regulator hose to propane tank. Secure
tightly by hand. Do not use tools.
3. Turn propane on by slowly turning valve counter-
clockwise. Take care not to turn too quickly to avoid
engagement of safety valve.
DO NOT MOVE TRAP WITH TANK ATTACHED!
TANK MUST BE DISCONNECTED FROM REGULATOR
BEFORE TRAP IS RELOCATED TO AVOID DAMAGE
TO REGULATOR AND/OR TRAP. BE ADVISED,
DAMAGE CAUSED FROM FAILURE TO COMPLY
WITH THIS INSTRUCTION IS NOT COVERED
UNDER WARRANTY.
7
Step 1 – Propane Tank Placement
Step 2 – Attach Regulator
Step 3 – Slowly Open Valve
Set-Up
USING THE CORRECT ATTRACTANT
OPTIMIZES THE CATCH RATE
OF YOUR TRAP.
Mosquito Magnet
Octenol
®
•
If you live in the northern half of the U.S., or along any
coastal areas in the U.S., use a fresh Mosquito Magnet.
Octenol cartridge every time you change the propane tank.
Mosquito Magnet R-Octenol
®
•
Much like Octenol, it's used to catch/attract biting insects.
•
Active ingredients in R-Octenol lasts for 30 days - 40% longer
than regular Octenol.
•
Increases your catch rate up to 10 times.
•
Ideal for trap owners with Mosquito Magnet
Executive
®
or Commander.
Lurex 3
™
•
If you live in the southern half of the U.S., the Asian Tiger
mosquito may be the predominant species in your area.
Lurex 3 is an attractant specially designed to capture hard to
•
catch and aggressive, day-biting species such as the Asian
Tiger mosquito.
To find out if Lurex 3 is right for you, go to
•
www.mosquitomagnet.com.
Use a fresh Lurex 3 cartridge every time you change the propane
•
tank.
8
Publicidad
