Belkin PureAV AP00002ea Instrucciones De Operación página 2

Introduction:
This Sniffer demonstration unit is used to provide a visual and
audible representation of AC-power-line noise that is detected within
an 115VAC or 230VAC electrical circuit at 50/60Hz.
Technical Specifications:
Input Power Supply:
Operating Current:
Noise-Frequency
Detection Range:
Operating Temperature:
Humidity:
Dimensions:
Weight:
Operation Procedure:
Step 1: Select Power-Supply Setting (Figure 1)
The default setting for the input power supply is 115V. If you are in
a 230V power environment, please set the "power supply selection
switch" to 230V. The input power-supply voltage (115V or 230V) will
be visible directly on the switch for your verification.
Caution: You must verify that the correct input power voltage is
selected, or the unit will be damaged if the switch is not in the
proper position.
Step 2: Power-Supply Connection (Figure 1 and Figure 2)
Connect the included power cable to the Sniffer. Once the power
cable is connected, the "Power On/Off" LED will illuminate and the
liquid crystal display (LCD) will display the line-noise status.
Note: To silence the loudspeaker, please press the "Sound"
button once.
1
5338ea_AP00002ea.indb 3
115VAC or 230VAC +/-10%; 50/60Hz
30mA max
100Hz to 2MHz
0° C to 40° C
0% to 90%
192.3 (L) x 100.6 (W) x 52.0mm (H)
0.7kg.
29/12/06 9:16:41 am