Safety Information - TechniSat DVB-С Serie Guía Rápida

Safety Information

For your safety, you should carefully read through the safety notes before you use this
unit.
The manufacturer does not take responsibility for any damages that result from improper
use and/or disregard for the prescribed safety measures.
> In order to insure proper ventilation, place the unit on a smooth, fl at surface and do
not put anything on the lid of the unit. Ventilation slits are here, through which heat
is funneled out from the interior of the device.
> Do not put anything lit on the unit, i.e. candles.
> Do not spray or allow water to drip on the unit and do not place anything fi lled with
water on the unit, i.e. vases.
Breaks in operation
The unit should be unplugged in case of storm or longer periods of absence (i.e.
vacation.)
DVB-Receiver to cable connection
a. DVB-Receiver connection to the antenna plug of the
cable connection.
b. DVB-Receiver Scart connection to the television unit.
c. Video unit Scart connection to the VCR Scart plug on
the DVB-Receiver.
d. Cable output connection to the television antenna input.
e. Cable output connection with hi-fi unit.
f. Power connection.
Card reader for smart cards*:
> Insert the smart card (gold chip facing down,
towards the slot) until it stops, into the card reader.
* Depending on model
Inserting the CI-Module**:
> Please take the CI-Module and card manufacturer's
instructions into account.
> Insert the desired smart card into the respective CI-Module.
> Insert the CI-Module carefully into the slot
** if available
3