Taurus Alpatec MF4000 Guia De Inicio Rapido página 8

- Position the wheel supports in the holes' base.
first and last elements of the radiator.
- Position the base with the body and fix it with
the base fixing nut (M).
- Stand the appliance up again so as to check
that the wheels work properly.
ASSEMBLING THE GRILL AND THE
PROPELLER:
- Fit the rear grill (G) on the motor housing (I),
matching their fitting points.
- Tight the grill nut (F) that attaches the grill,
Make sure of a correct setting.
- Fit the propeller (D) On the motor shaft.
- Tight the nut (C) that attaches the propeller,
Make sure of a correct setting.
- Fit the front grill (B) front the rear grill, matching
the security screw position. Fix the front grill
turning around its fixing belt (E) and tight the
security screw by using a screwdriver.
- Check the correct rotation of the propeller.
INSTRUCTIONS FOR USE
USE:
- Extend the cable completely before plugging
it in.
- Connect the appliance to the mains.
- Turn the appliance on, by using the speed
selector button (f, VI).
- Select the desired speed.
- Select the desired airflow mode.
TIMER FUNCTION:
- To program the operating time simply select it
using the (c, III) button.
- The time programmed or remaining time will
appear on the display.
- After the selected time the appliance will switch
off automatically.
OSCILLATION FUNCTION:
- The oscillation function makes it possible to
direct the flow from the apparatus so that it
automatically alternates over a range of 75º.
- To activate this function, press the (d, IV)
button.
- To deactivate this function, follow the proce-
dure for switching it on in reverse.
ANTI-MOSQUITO FUNCTION:
- On the back of the body there is a groove
where the anti-mosquito pill should be placed
(not included).
- Press the anti-mosquito button (VIII).
- To deactivate this function, follow the proce-
dure for switching it on in reverse.
AROMATIC FUNCTION:
- The tray for the aromatic function is located on
the front of the front grille.
- To activate this function press button (d, IV).
- To deactivate this function, follow the proce-
dure for switching it on in reverse.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Stop the appliance using the OFF button.
- Unplug the appliance from the mains.
- Clean the appliance.
SAFETY THERMAL PROTECTOR:
- The appliance has a safety device, which pro-
tects the appliance from overheating.
CLEANING
- Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of
the appliance.
- Never submerge the appliance in water or any
other liquid or place it under running water.
- If the appliance is not in good condition of
cleanliness, its surface may degrade and
inexorably affect the duration of the appliance's
useful life and could become unsafe to use.