Chopping Quantities And Processing Times - Philips HR1619 Manual Del Usuario

Tabla de contenido

Idiomas disponibles

EnglisH

Blending quantities and preparation times

Ingredients

Fruits & vegetables

Baby food, soups & sauces 100-400ml

Battters

Shakes & mixed drinks

Attach the blender bar to the motor unit ('click') (Fig. 2).

Put the plug in the wall socket.

Immerse the blade guard completely in the ingredients to avoid splashing (Fig. 3).

Press the on/off button or the turbo speed button to switch on the appliance.

When you use the on/off button, you can adjust the speed with the speed selector. The higher

the speed, the shorter the processing time required.

When you use the turbo speed button, the appliance operates at maximum speed. In this case,

you cannot adjust the speed with the speed selector.

Note: The higher the speed, the shorter the processing time required.

Move the appliance slowly up and down and in circles to blend the ingredients (Fig. 4).

After processing, release the on/off button or the turbo speed button to switch off the

appliance. Then wait until the blade unit has stopped rotating.

Food processor

Blade unit

The blade unit is intended for chopping ingredients such as nuts, meat, onions, hard cheese, boiled

eggs, garlic, herbs, dry bread etc.

The cutting edges of the blade unit are very sharp! Be very careful when you handle the blade

unit, especially when you remove it from the bowl, when you empty the bowl and during cleaning.

Place the tool holder in the bowl (Fig. 5).

Remove the protective cover from the blade unit.

Put the blade unit on the tool holder (Fig. 6).

Put the ingredients in the bowl.

See the table below for the recommended quantities and processing times.