Kodak PH202 Guia De Inicio Rapido página 3

1 - Unfasten clip su iciently by rotating the lever.
2 - Insert fixing plate to the edge of the clip.
3 - Insert clip into a vent grill so the fixing plate touches one
vent grill & the vent grill frame or two vent grills (One
above/right and one below/left).
4 - Fasten lever whilst pushing clip deeper so as to avoid the
presence of any gap between fixing plate and vent grill or
grill frame.
5 - Check if vent clip is fixed firmly and correctly.
6 - If you do not require use of the fixing plate, open clip
widely and pull it out as shown in the diagram.
INSTALLATION
No Gap Here
03