Publicidad
STEP 4
If you have 30" or 36" combination
drawer box, refer to the Blum
lateral stabilizer bar instruction
sheet included in the stabilizer
bar kit.
STEP 5
NOTE: For frameless application,
skip to Step 6.
Attach the rear Blum brackets on
the back of the cabinet using (4)
#8 x 5/8" wood screws for each
bracket (See Figure D).
Place (2) screws in the top row
in each of the two corners and
place (2) screws in the fourth row
as indicated by the dark circles in
Figure D.
STEP 6
Attach both the left and right Blum
slides to the cabinet by sliding
them onto their corresponding rear
brackets (See Figure E-1). Screw
the slides to the face frame with (2)
#8 x 5/8" wood screws each
(See Figure E-2).
NOTE: Frameless applications will
use (2) #8 x 5/8" wood screws on
the left side and (3) #8 x 5/8"
wood screws on the right side
(See Fig. E-3).
FIG. D
FIG. E-1
FIG. E-3
11/32" (9 mm)
Right Side Screw Locations
INSTALLATION INSTRUCTIONS: MAPLE DRAWER SYSTEM
13/16"
(21 mm)
1-1/32"
9/16"
(14 mm)
(26 mm)
(11.6 mm)
FIG. E-2
B
A
1-15/32" (37 mm)
1-1/4" (32 mm)
Left Side Screw Locations
1/8" (3 mm) Setback
Runner length
Inside cabinet depth
15/32"
13/32" (10 mm)
Frameless and
face frame
Face frame
only
3
Publicidad
