Quoizel LWS2323A Manual Del Usuario página 5

STEP 10:
a. Install correct bulbs referring to fixture markings and/or labels for maximum wattage.
STEP 11:
a. Remove the finial, cap, hex nut, rubber washer with flat
washer from the stem assembly.
STEP 12:
A. Thread the short threaded end of the stem onto the
coupling on fixture.
b. Hand-tighten until snug.
STEP 13:
a
. Place diffuser and the previously removed rubber
washer with flat washer over the stem.
b. Secure with the previously removed hex nut.
c. Hand-tighten until snug.
STEP 14:
a. Place the previously removed cap over the stem
extruding from the diffuser.
b. Secure with the previously removed finial.
c. Hand-tighten until snug.
Your installation is now complete! Restore electricity and save this sheet for future reference.
2015 QuoizelInc.
Stem Assembly
Hex Nut
5
Stem
Rubber Washer
with Flat Washer
Hex Nut
Cap
Finial
Fixture
Coupling
Stem
Stem
Diffuser
Rubber Washer
with Flat Washer
Fixture
Stem
Cap
Finial
Nov.2015