Tupperware FusionMaster Manual Del Usuario página 3

1.
a S D F G J H
A
B
C
A
B
CLICK
C
4
Congratulations on your selection of FusionMaster system products. This
system uses a common suction base that is strongly bounded to the countertop
thanks to its vacuum action.
Read these instructions for use carefully before using the appliance and save
them for future reference. The appliance is intended for indoor household use only.
section).
1. Ensure the suction foot's ring is on the unlock position
2.
3. To bond the foot to the countertop and lock the top part to the suction foot,
, until a click occurs. Ensure all parts are
1. It is recommended to wash and dry the foot by hand. It is washed by soaking
it in soapy water and rinsing it under clear, running water.
2.
For an optimal bond between the suction foot and the countertop, the
D
Moisture sometimes helps assist the suction bond: wipe the surface and the
bottom of the foot with a damp cloth.
the foot.
If the product was used or left unused for a while, ensure the foot suction is
still well bonded to the countertop before re-using it.
Never use any accessories or parts from other manufacturers or your
guarantee becomes invalid.
For their safety, do not allow children to play with the product.
Limited Tupperware guarantee applies.
This guarantee does not include replacement for damage to the suction foot
resulting from negligent use or misuse of the product. Please contact your
Tupperware consultant for a replacement.
2. Mincer Components
The FusionMaster Mincer
one with larger holes for coarse mincing.
a s D F G J H
Use a low temperature programme on your dishwasher to save energy and protect the environment.
1.
into the hopper. The metal end is on the hopper's front side.
2.
NOTE: You won't be able to slide the mincer disc correctly if the blade is
3.
4.
5.
screwing the crank screw.
1.
NOTE: Please ensure that the food is thawed thoroughly before mincing.
The meat mincer is intended to mince boneless meat for household use
only. Check the meat for bones and unwanted fat. Clean the food/meat and
2. Turn the crank clockwise to process the food. If necessary, you can use the
pushing down, it will be harder to process the food and this could damage
your mincer.
3. There is a chance that the food/meat will get stuck in the screw during
operation: if this happens, turn the crank counterclockwise a few times
to release the jam and revert to the forward direction again. Never apply
excessive force.
1.
through the screw ring. Then, follow step 4 of the assembly section.
2.
3. Press the sausage skin around the sausage insert and control the squeezing
pressure while processing the food to create the desired sausage tube. When
done, knot the other end.
4.
turning the sausage around its own axis once or twice. It can be done during
sausage.
Clean thoroughly all parts used in processing the food immediately after use.
wash and dry the metal parts by hand. Never let the cutting fan come in contact
with other metal, ceramic or glass instruments as this would damage its cutting
edges. It is recommended to wash and dry the foot by hand.
Use the plunger as a storage compartment to store the following dried
elements: the cutting fan, the mincer disc and the sausage insert.
screw ring.
Process the food several times to achieve desired texture and mixture.
This can be done before using the sausage insert.
Cold food is easier to mince.
For their safety, do not allow children to play with the product.
Guarantee
Limited Tupperware guarantee applies.
The Tupperware guarantee protects the FusionMaster Mincer against chipping,
cracking, breaking or peeling under normal non-commercial use for the lifetime
of the product. This guarantee does not include replacement for used blades,
nor does it cover rusting or other damage to the product resulting from negligent
use or misuse of the product. Please contact your Tupperware consultant for
a replacement.
www.tupperwarebrands.com
EN
5