Operating A Device Using Wireless Connection; Checking Compatible Devices; Mirroring The Android Device Screen To The Av Receiver - Kenwood KCA-WL100 Manual De Instrucciones

Operating a device using wireless connection

Operating a device using wireless connection

Checking compatible devices

You can use the following devices with the adapter.
• For Wireless Mirroring mode (see below): Android devices
compatible with Wireless Mirroring function (Android 4.2 or later).
– You can display the same screen displayed on the Android
device on the AV receiver.
• For Wireless Link mode (see pages 6 and 7): Android
devices compatible with Wireless Link
– You can play content stored on the Android device on the AV
receiver.
– With the Wireless Link mode, you can also display content from
the Internet by using another device as an access point.
Mirroring the Android device screen to the AV
receiver—Wireless Mirroring mode
1
Turn on the AV receiver and select the HDMI input for
the source on the AV receiver.
2
Switch the connection mode to "Wireless Mirroring".
• If you cannot select the connection mode on the AV receiver,
perform the operation on the adapter. (Page 8)
• If the connection mode is "Wireless Mirroring", go to step 3.
On the AV receiver:
Connection mode
3
Operate the Android device to activate Wireless
Mirroring, and then select "KCA-WL100_XXXXX
(identification number)" as the adapter to use.
• Wireless Mirroring may be called Wireless Display, Screen
Mirroring, AllShare Cast, etc., depending on the manufacturer.
• The settings on the Android device differ depending on
the device type. For details, refer to the instruction manual
supplied with your Android device.
When the connection is established, "Ready to display" is
displayed on the AV receiver.
The same screen is displayed on the both the Android device
and the AV receiver.
ENGLISH 5