Errors & Troubleshooting - Lumiscope 1157 Manual Del Usuario

Errors / Troubleshooting:
Please refer to the following chart regarding Errors and Troubleshooting your
model 1157:
Error / Symptom
· No display after pressing the Power
button
· No response after pressing Start/
Stop button
· Battery icon flashes and/or backlight
decreases in brightness
· Cuff fails to fully inflate and no mea-
surement is taken
· Err01, Err02 or Err03 message on
display
1157-IM-bilingual.indd 13
Correctional Action
· Check batteries; ensure correct
position, replace with 4 new 'AA' bat-
teries
· Press Start/Stop again
· Check and replace batteries
· Contact service department at 1-
800-672-8293
· Check and replace batteries
· Re-apply cuff correctly, begin mea-
surement again
· Cuff is improperly aligned. Align cuff
according to page 8 and measure
again.
13
3/11/05 10:59:47 AM