Preliminary Instruction Of Use; Electrical Connections; Driver Installation - Seneca UART TTL Manual De Instalacion Y Uso

4.0 PRELIMINARY INSTRUCTION FOR USE
The EASY-USB can be used in any position and place in accordance to expected
environmental conditions.
Is recommended to use a communication cable that don't exceeds the lenght of 3 m
to avoid something problems about communication.

5.0 ELECTRICAL CONNECTIONS

The picture below shows how to connect the EASY-USB to configuring a Seneca device with
TTL serial port. From the left to the right:
Seneca device to configuring with TTL com port (T120, T121, EASY-GSM, K121, K111 etc..),
PM002412 (programming cable), EASY-USB (
configuration software (for eg. EASY-LP)
From configuring
device with TTL com port
like: T120, T121
EASY-GSM, K121 etc..

6.0 DRIVER INSTALLATION

Connect the EASY-USB when the PC is switchen on, automatically the OS detect the new
device.
The installation starts after the detection of EASY-USB by OS, during the installation the
following messages are shows
P 002412 M
TTL-USB
MI002381-E
5.1 Configuring
converter), user PC with installed
EASY-USB
6.1 Window XP or higher
Fig.1
Fig.2
To
User PC
ENGLISH 4/5