Publicidad
Enlaces rápidos
INSTALLATION INSTRUCTIONS
PUTCO PURE BOSS ROOF LIGHTS
#900660, 900560 (03-07 HUMMER H2)
Please note: You must follow these instructions to install the parts correctly otherwise damage may occur.
Read all instructions before installation and check to see if all parts listed are included.
KIT CONTENTS
Item#
Qty Description
1
5
Boss Roof Lamp (#900660)
2
2
Boss Roof Lamp (#900560)
REPLACEMENT BOSS ROOF LIGHT INSTALLATION INSTRUCTIONS
1
Remove existing side roof lights.
Locate the bolt at back of each side (corner) roof light. Remove
bolt by turning counter‐clockwise. Set bolts aside for later use.
Lift up on existing light and unplug wires from vehicle wiring
harness.
2
Install replacement side Boss Roof Lights in
factory mounting holes.
Plug replacement side (corner) roof lights into vehicle's wiring
harness. Align plastic tab and bolt hole on new light with mount‐
ing holes in the truck's roof. Press firmly down on replacement
light and insert bolt. Turn bolt clockwise to complete installation.
Note: Test light to ensure it is functioning properly. If light does
not work you may need to reverse the wiring plug.
LIMITED WARRANTY
Putco guarantees its products against defects in workmanship and material for as long as you own your vehicle. Any defects resulting from faulty material or workmanship will
be warranted by Putco and repaired or replaced at our discretion. Putco assumes no extra labor costs. Damages caused by freight carriers, improper installation, misuse, colli‐
sion, or neglect will not be warranted by Putco. Putco is not liable for any vehicle damage resulting from the installation of our Pure Replacement Roof Lights.
PUTCO PURE REPLACEMENT ROOF LIGHTS 2007‐08‐01
HARDWARE KIT CONTENTS
Questions? Call Putco's customer service at 1-800-247-3974
Monday – Friday, 8am – 5pm central time
216 West First Street ▪ Story City, IA ▪ 50248
None
3
For #900660:
Remove existing center roof lights.
Lift up on factory‐installed center roof lamps to locate small
metal tab. Press on tab to release the lamp from roof of vehicle.
Unplug lamp from vehicle's wiring and remove.
4
For #900660:
Install replacement center roof lights.
Plug replacement center roof lights into vehicle's wiring
harness. Align plastic tabs on new light with mounting holes in
the truck's roof. Press firmly down on replacement light and
snap replacement light in place. Note: Test light to ensure it is
functioning properly. If light does not work you may need to
reverse the wiring plug.
5
Test replacement roof lights.
Turn on your vehicle's lights and check the Pure Roof Light
installation before driving.
www.putco.com
RECOMMENDED TOOLS
Safety Tools
1. Eye Protection
Installation Tools
1. Screwdriver (Phillips head and Flat head)
www.putco.com
Publicidad
Resumen de contenidos para PUTCO PURE 900660
- Página 1 Note: Test light to ensure it is functioning properly. If light does reverse the wiring plug. not work you may need to reverse the wiring plug. Test replacement roof lights. Turn on your vehicle’s lights and check the Pure Roof Light installation before driving. Questions? Call Putco's customer service at 1-800-247-3974 Monday – Friday, 8am – 5pm central time 216 West First Street ▪ Story City, IA ▪ 50248 www.putco.com LIMITED WARRANTY Putco guarantees its products against defects in workmanship and material for as long as you own your vehicle. Any defects resulting from faulty material or workmanship will be warranted by Putco and repaired or replaced at our discretion. Putco assumes no extra labor costs. Damages caused by freight carriers, improper installation, misuse, colli‐ sion, or neglect will not be warranted by Putco. Putco is not liable for any vehicle damage resulting from the installation of our Pure Replacement Roof Lights. PUTCO PURE REPLACEMENT ROOF LIGHTS 2007‐08‐01 ...
- Página 2 Pour #900660: localizar pequeña etiqueta de metal. La prensa en la etiqueta para liberar la lámpara del techo de vehículo. Quite lámpara del ve‐ Enlever les lumières existantes de toit de centre. hículo alambra y quita. L'ascenseur en haut sur les lampes de toit de centre installé es à la fabrication pour localiser la petite étiquette en métal. La presse sur l'étiquette pour relâcher la lampe du toit de véhicule. Dé‐ Para #900660: brancher la lampe du véhicule télégraphie et enlève. Instale el reemplazo las luces centrales de techo. Las luces del techo del centro del reemplazo del tapón en el ve‐ Pour #900660: Installer les lumières de toit de hículo alambran arreos. Alinee las etiquetas plásticas en nueva luz con montar hoyos en el techo de camión. Apriete firmemente centre de remplacement. hacia abajo en la luz del reemplazo y el reemplazo repentino enci‐ Les lumières de toit de centre de remplacement de bouchon dans ende en el lugar. Pruebe la luz para asegurar que funcione apropi‐ le véhicule télégraphient l'harnais. Aligner des étiquettes en adamente. Si la luz no le trabaja puede necesitar invertir el tapón plastique sur la nouvelle lumière avec monter de trous dans le toit de alambrado. du camion. Appuyer fermement en bas sur la lumière de rem‐ placement et la lumière de remplacement de claquement à sa place. Essayer la lumière pour s'assurer qu'il fonctionne con‐ venablement. Si la lumière ne travaille pas peut vous avoir besoin El techo del reemplazo de la prueba enciende. de renverser le bouchon d'installation éléctrique. Prenda sus luces de vehículo y verifique el Techo la instalación Ligera antes de manejar. Le toit de remplacement de test allume. Allumer les lumières de votre véhicules et vérifier le Toit l'installa‐ tion Légère avant de conduire. PUTCO PURE REPLACEMENT ROOF LIGHTS 2007‐08‐01 www.putco.com ...