Installation; Connecting To The Air Compressor - Husky 019-0332H Guía De Uso Y Cuidados

Regulador de presión de flujo alto de 1/4”
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation

1
Connecting to the air
compressor
DANGER: This product is specifically designed for
compressed air service only.
WARNING: Always turn compressor OFF, disconnect
from power source, and drain all pressure from system
before servicing.
NOTE: Use thread sealer or Teflon
When installing the regulator (A) to the outlet
port (FF) on the side of the air compressor
tank (GG), a reducer bushing (AA) will be
needed to reduce the threads so a pipe nipple
(BB) will fit. Reference Figure 1.
Thread a reducer bushing (AA) into the outlet
port (FF) and tighten using an adjustable
wrench.
Thread a pipe nipple (BB) into the reducer
bushing (AA).
Tighten the pipe nipple (BB) with either
an adjustable wrench or a pipe wrench,
depending on the type of pipe nipple used.
AA
FF
GG
Typical Installation
Part
Description
AA
Reducer Bushing
BB
Pipe Nipple
CC
Quick Connect Coupler (Optional)
DD
Quick Coupler Plug (Optional)
EE
Air Hose
on all male threads.
®
BB
CC
B
A
A
II
JJ
HH
B
Thread the inlet port (II) of the regulator (A)
onto the end of the pipe nipple (BB).
NOTE: The air flow direction arrow (HH) on the bottom of
the regulator (A) must point towards the outlet port (JJ).
Tighten the regulator (A) using an adjustable
wrench.
Thread the gauge (B) into the open 1/8" port
on the regulator (A).
Tighten the gauge (B) using a 7/16" open end
wrench.
Thread either a quick connect coupler (CC) or
an air hose (EE) into the outlet port (JJ) of the
regulator (A).
Tighten using an adjustable wrench.
NOTE: When using a quick connect coupler (CC), thread
a quick coupler plug (DD) onto the end of the air hose (EE)
and tighten using an adjustable wrench.
NOTE: Insert the quick coupler plug (DD) into the quick
connect coupler (CC) and push to lock in place.
DD
Part
Description
FF
Air Compressor Outlet Port
GG
Air Compressor Tank
HH
Air Flow Direction Arrow
II
Regulator Inlet Port
JJ
Regulator Outlet Port
5
Please contact 1-888-HD-HUSKY for further assistance.
EE
Figure 1
HUSKYTOOLS.com
CC

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

1002-085-188

Tabla de contenido