HEROSE E4186-3000-0030 Instrucciones De Montaje página 30

Assembly/disassembly instructions 4186-3
1 and
2
E
A
10
D
E
120
Nm
12
herose.com
Step 4:
 Apply high-pressure lubricant thinly and
uniformly to the internal thread of the
hex nut on the first 5 thread pitches
Recommendation: Klüberalfa YV 93-
302
Step 5:
 Place connecting nipple (1) with hex
nut (2) centrally over the centring aid
(E) onto the spring and press down
using the assembly stud (D) against
spring force
 Screw hex stud (2) hand-tight with the
casing
Step 6:
 Tighten hex nut (2) to torque 120 Nm
 Remove centring aid E
Step 7:
 Turn casing (11) in the cut-out (A)
 Remove tubular overflow (6) and
compression spring (3) from assembly
aid (F)
 Place PTFE seal (12) into the casing