Sensitech Sentry 500 Instrucciones De Uso página 3

Powering Sentry 500 On
1
1. Remove Sentry 500 from charger. Press and
hold the button.
2
2. The LEDs will illuminate
500 is off.
3
3. Continue to press until the LEDs flash GREEN.
4. When the LEDs go solid
4
Sentry 500 is on.
5. After the LEDs go solid
5
Charging LED indicators
Turn device OFF before charging
Align USB Tabs with
Sentry 500
Push both together
Slide to lock
Sentry 500 Instructions for Use
RED
indicating Sentry
GREEN
GREEN
they will go off.
Check SENTRY 500 Status
1
1. Press and release the button.
Press
2
2. Sentry 500 is on if both LEDs are GREEN.
3
3. Both LEDs flash GREEN.
4
4. Then go out.
5
5. If Sentry 500 is off both LEDs will be RED.
6
6. Both LEDs flash RED.
7
7. Then go out.
Charging Sentry 500 OFF
Fully charged Sentry 500 OFF
Powering Sentry 500 Off
1
1. Remove Sentry 500 from charger.
2
2. The LEDs will illuminate
3
3. Continue to press until the LEDs flash RED.
4. When the LEDs go solid
4
5. After the LEDs go solid
5
Extended Battery LEDs
Lock for Sentry 500
Attachment
Fully Charged 100%
Between 85-99%
Between 25-85%
Less than 25%
3
Press and hold the button.
GREEN
indicating Sentry 500 is on.
RED
Sentry 500 is
on.
RED
they will go off.
Charging Status
LED indicator
14-Pin Connector
for Sentry 500
Attachment