Tabla de contenido
Publicidad
Getting started
•
Connect the appliance to an electrical outlet and push the
«on/off» button
•
During heat-up, the temperature display shows three red flashing
segments (Fig. A).
•
After approximately 40 seconds, the minimum styling
temperature is reached. You can start using the appliance.
•
Using the temperature selector
temperature within a 5-step range that is represented by
segments in the display
setting, the display segments will flash.
•
As soon as the preset temperature is reached, the display
segments stop flashing.
•
We recommend the following temperature settings:
1 segment «°C min»:
2 to 4 segments:
5 segments «°C max»: for thick hair and professional use (Fig. C)
The higher the temperature setting, the faster you will get a sleek
straightening result.
However, for better care of chemically treated hair, the
temperature setting should be 3 segments maximum.
Styling
Preparing for use
•
Make sure your hair is completely dry before using the appliance.
•
First, comb your hair through with a wide toothed comb to
remove tangles (Fig. D).
•
Section your hair off. Starting close to the roots, take a thin
section of hair (strands of 3–4 cm maximum) and clamp it firmly
between the styling plates (Fig. E).
How to straighten your hair
•
Gently run the straightener through the entire length of the hair,
slowly and steadily, from roots to the ends (Fig. F) without
stopping for longer than 2 seconds. This will ensure best
straightening results without damaging your hair. The styling
plates
ensure easy and smooth gliding.
1
•
For improved control when gliding along a strand, you may
stabilise the appliance by holding it with the other hand on the
cool touch points
•
You can create flicks at the hair ends by slowly turning the
appliance either outwards or inwards before releasing a strand.
Safety auto-off
For safety reasons, the appliance automatically switches off after
approximately 30 minutes.
If you want to keep on straightening, simply press the «on/off»
button
.
5
After use
•
After each use, switch off the appliance by pushing the «on/off»
button
for 1 second.
5
•
Even after switching off, the styling plates are still hot. Do not
touch them to avoid burnings. Only after 20 minutes cooling time
you can touch the appliance without any risk.
Cleaning
•
Always unplug before cleaning. Never immerse the appliance in
water.
•
Clean the appliance with a damp cloth and use a soft cloth to
dry.
Subject to change without notice.
This product conforms to the European Directives
EMC 89/336/EEC and Low Voltage 2006/95/EC.
Please do not dispose of the product in the household
waste at the end of its useful life. Disposal can take place at
a Braun Service Centre or at appropriate collection points
provided in your country.
6
for three seconds to turn it on.
5
. When changing the temperature
3
for fine hair (Fig. B)
for normal hair
.
2
«– / +», you can adjust the
4
Publicidad
Tabla de contenido
