Alpine ERE-G190 Manual De Operación página 16

1
0º
1
SUBSONIC FILTER
OFF
16
PHASE
180º
30Hz
15Hz
Basic Operation
Setting Subwoofer Output
Phase Switch
Changes the phase to 0° (in phase) or 180°
(inverted) referenced to the input. Before fine
tuning the crossover, adjust the output phase
for best performance.
Note: This switch is provided on the rear panel.
Setting Subsonic Filter
Switch
The subsonic filter is a High-pass filter with a
very low frequency cut-off for the subwoofer
output. With this function used, overdriving the
subwoofer and subwoofer amp can be reduced.
Inaudible, low frequency energy below 15 or 30
Hz (selectable) can be reduced using this
feature.
Notes:
• Setting the switch to the "OFF" position
leaves your subwoofer open to possibly
damaging subsonic frequencies.
• This switch is provided on the rear panel.
English